P2459 – DPF Pressure Sensor A Circuit High Voltage

POSTED IN pcodes

Updated on:

Urgency and Drivability Implications

The P2459 code, indicating an issue with Diesel Particulate Filter (DPF) regeneration frequency, is not immediately critical but should be addressed promptly to prevent more severe problems. While the vehicle can typically continue to be driven, ignoring this code may lead to:

In our workshop, we've noticed P2459 occurring frequently across various European car makes, particularly in Volkswagen, BMW, and Mercedes-Benz diesel models. We've seen it most often in VW Golf TDIs and Passat TDIs from 2009-2015, BMW 3-Series and 5-Series diesels from 2010-2016, and Mercedes-Benz E-Class and ML-Class diesels from 2011-2017. The code typically appears after 100,000-150,000 km, often accompanied by reduced performance and increased fuel consumption. In most cases, we've found the root cause to be a faulty DPF pressure sensor or clogged DPF, though occasionally it's been due to software issues in the engine control module. While American and Asian diesel vehicles also experience this code, we've found it to be more prevalent and challenging to resolve in European models.

  • Reduced fuel efficiency
  • Decreased engine performance
  • Potential damage to the DPF or other exhaust components

It is advisable to have the issue diagnosed and repaired within a reasonable timeframe to maintain optimal vehicle performance and prevent costly repairs.

Detailed Explanation of P2459

P2459 is a generic OBD-II code applicable to diesel-powered vehicles equipped with a DPF system. This code specifically indicates that the Powertrain Control Module (PCM) has detected an abnormal frequency of DPF regeneration cycles.

The code's meaning can be broken down as follows:

Buy tested tuning file for Adblue / EGR / DPF / Adblue off now!

Register Now or Already have an account,

  • P: Powertrain-related code
  • 2: Manufacturer-specific code
  • 459: Specific fault index for DPF regeneration frequency

While P2459 is a generic code, the exact parameters and thresholds for triggering it may vary across different vehicle makes and models.

DPF System Overview

The Diesel Particulate Filter is a critical component of modern diesel exhaust systems, designed to trap and remove soot particles from the exhaust gases. Key components of the DPF system include:

  1. DPF: Ceramic honeycomb structure that captures particulate matter
  2. Pressure sensors: Monitor exhaust backpressure before and after the DPF
  3. Temperature sensors: Monitor exhaust gas temperatures
  4. ECU/PCM: Controls and monitors the DPF system
  5. Regeneration system: Includes fuel injectors or other methods to increase exhaust temperatures

The DPF system operates by:

  1. Trapping soot particles as exhaust passes through the filter
  2. Monitoring soot accumulation via pressure differential
  3. Initiating regeneration when soot levels reach a predetermined threshold
  4. Burning off accumulated soot at high temperatures (typically 500-600°C or 932-1112°F)

Common Causes of P2459

  1. Frequent short trips preventing complete DPF regeneration
  2. Faulty pressure or temperature sensors
  3. Clogged or damaged DPF
  4. Issues with the fuel injection system
  5. Exhaust leaks
  6. Malfunctioning EGR system
  7. Engine oil consumption issues
  8. PCM software glitches or outdated calibration

Diagnostic Procedure

Tools required:

  • OBD-II scanner with advanced functionality
  • Digital multimeter
  • Exhaust backpressure gauge
  • Smoke machine (for detecting exhaust leaks)

Step-by-step diagnosis:

  1. Connect OBD-II scanner and retrieve all stored codes and freeze frame data
  2. Review vehicle's drive cycle and regeneration history
  3. Inspect DPF and exhaust system for visible damage or leaks
  4. Check engine oil level and condition
  5. Measure exhaust backpressure before and after the DPF
    • Normal range: 0-10 kPa (0-1.45 psi) at idle, up to 40 kPa (5.8 psi) under load
  6. Verify proper operation of pressure and temperature sensors
  7. Perform a forced DPF regeneration using a scan tool
  8. Monitor regeneration process and relevant parameters
  9. Check for software updates or calibration issues

Repair Solutions

Potential fixes based on root causes:

  1. Educate driver on proper driving habits to facilitate regeneration
  2. Replace faulty sensors
  3. Clean or replace clogged DPF
  4. Repair exhaust leaks
  5. Address engine oil consumption issues
  6. Update PCM software if available

Replacement vs. repair:

  • DPF cleaning should be attempted before replacement if no physical damage is present
  • Sensor replacement is typically more cost-effective than repair attempts

Prevention Strategies

  1. Ensure regular highway driving to facilitate passive regeneration
  2. Use high-quality diesel fuel and engine oil
  3. Follow manufacturer-recommended maintenance schedules
  4. Address any engine performance issues promptly
  5. Consider periodic use of DPF cleaning additives

Cost Analysis

Estimated repair costs (USD/EUR):

  • DPF cleaning: $300-$800 / €250-€675
  • DPF replacement: $1,000-$4,000 / €850-€3,400
  • Sensor replacement: $150-$400 / €125-€340
  • PCM software update: $100-$300 / €85-€250

Labor costs vary by region and shop rates.

DIY Repair Guide

For skilled mechanics:

  1. Perform thorough diagnosis to identify root cause
  2. If sensor-related, replace faulty components and clear codes
  3. For DPF cleaning:
    • Remove DPF from vehicle
    • Use specialized cleaning equipment or solutions
    • Reinstall and perform forced regeneration
  4. For software updates, use appropriate diagnostic tool to flash PCM

Common associated problems:

  • Excessive soot production
  • Incomplete combustion
  • Fuel system issues

Related DTCs:

  • P2002: DPF efficiency below threshold
  • P2463: DPF soot accumulation
  • P242F: DPF regeneration incomplete

By addressing P2459 promptly and thoroughly, technicians can prevent more severe DPF-related issues and maintain optimal vehicle performance.

Frequently Asked Questions About P2459

What does the P2459 code mean?

P2459 indicates that the Powertrain Control Module (PCM) has detected an abnormal frequency of Diesel Particulate Filter (DPF) regeneration cycles.

Is P2459 a generic or manufacturer-specific code?

P2459 is a generic OBD-II code applicable to diesel-powered vehicles equipped with a DPF system.

How urgent is it to address the P2459 code?

While not immediately critical, P2459 should be addressed promptly to prevent potential damage to the DPF or other exhaust components.

Can I continue driving with the P2459 code?

You can typically continue driving, but it’s advisable to have the issue diagnosed and repaired soon to maintain optimal vehicle performance.

What are the common causes of the P2459 code?

Common causes include frequent short trips, faulty sensors, clogged DPF, exhaust leaks, and PCM software issues.

How does the DPF system work?

The DPF traps soot particles from exhaust gases, then periodically burns them off through a process called regeneration.

What is DPF regeneration?

DPF regeneration is the process of burning off accumulated soot particles at high temperatures, typically 500-600°C (932-1112°F).

How often should DPF regeneration occur?

The frequency varies depending on driving conditions, but typically every 300-900 miles for passive regeneration.

What tools are needed to diagnose P2459?

An OBD-II scanner with advanced functionality, digital multimeter, exhaust backpressure gauge, and possibly a smoke machine.

What are the symptoms of P2459?

Symptoms may include reduced fuel efficiency, decreased engine performance, and illumination of the check engine light.

Can P2459 be caused by low-quality fuel?

Yes, using low-quality diesel fuel can contribute to excessive soot production and more frequent DPF regenerations.

How do driving habits affect P2459?

Frequent short trips or excessive idling can prevent complete DPF regeneration, potentially triggering P2459.

What sensors are involved in the DPF system?

Key sensors include pressure sensors, temperature sensors, and sometimes oxygen sensors.

Can a clogged air filter cause P2459?

While not a direct cause, a clogged air filter can lead to incomplete combustion, increasing soot production and DPF regeneration frequency.

How much does it typically cost to repair P2459?

Repair costs can vary widely, from $300-$800 for DPF cleaning to $1,000-$4,000 for DPF replacement, plus diagnostic fees.

Can I clear the P2459 code myself?

While you can clear the code, it will likely return if the underlying issue isn’t addressed. Professional diagnosis is recommended.

Are there any preventive measures for P2459?

Regular highway driving, using high-quality fuel, following maintenance schedules, and addressing performance issues promptly can help prevent P2459.

Can P2459 be related to the EGR system?

Yes, a malfunctioning EGR system can contribute to increased soot production, potentially triggering P2459.

What other codes are often associated with P2459?

Related codes may include P2002 (DPF efficiency below threshold), P2463 (DPF soot accumulation), and P242F (DPF regeneration incomplete).

Can extreme weather conditions affect DPF regeneration and trigger P2459?

Yes, extremely cold weather can make it harder for the exhaust to reach temperatures required for regeneration, potentially leading to P2459.

Buy tested tuning file for Adblue / EGR / DPF / Adblue off now!

Register Now or Already have an account,

Related posts